Author Topic: 2.0 Cable Control Conversion Kit Installation Video  (Read 682 times)

0 Members and 1 Guest are viewing this topic.

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 7235
  • Cool Points: 75
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21/17,2 KX21,CH395
  • Model Year: 2003,2011,2015,2021
2.0 Cable Control Conversion Kit Installation Video
« on: January 16, 2022, 08:38:03 PM »
Installation video for my cable conversion kit. 🤓👍


Tom

  >:D    

_________________________

www.PainlessClutch.com

Offline CC-CODER

  • Mokai Maniac Member
  • ******
  • Posts: 1491
  • Cool Points: 68
  • Engine: EX21 w/17 Head - ES
  • Model Year: 2010 (2)
Re: 2.0 Cable Control Conversion Kit Installation Video
« Reply #1 on: January 16, 2022, 09:24:52 PM »
I like how easy you made it look to replace, must have done a few of those conversions before?  :)
Did you leave the floatation tanks in your Painless 2.1?
Do you think your new gas tank would provide floatation up front?
🤦🏼‍♂️ Chuck🤷🏻‍♂️

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 7235
  • Cool Points: 75
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21/17,2 KX21,CH395
  • Model Year: 2003,2011,2015,2021
Re: 2.0 Cable Control Conversion Kit Installation Video
« Reply #2 on: January 16, 2022, 09:32:36 PM »
This was the second one, it's not hard. Much easier than the previous model ES-kape. Mine is set up the same way, just the left side flotation. I doubt the gas tank bow conversion I did on mine would provide much flotation, one reason I'm not recommending anyone else do that, and keeping it a DIY at your own risk mod. Adding a larger plastic tank in leu of the stock aluminum tank, in the forward section of the cockpit, will help with balance enough to be worth the effort.
Tom

  >:D    

_________________________

www.PainlessClutch.com

Offline Hillbilly

  • Mokai Maniac Member
  • ******
  • Posts: 1090
  • Cool Points: 58
  • Engine: Subaru
  • Model Year: many
Re: 2.0 Cable Control Conversion Kit Installation Video
« Reply #3 on: January 17, 2022, 08:26:44 AM »
Tom,

The thought and workmanship in your kit is remarkable from start to finish.  Even the electric harness has been developed to an amazing level.  Thanks for the video.  Think I'll watch it again.
 



Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 7235
  • Cool Points: 75
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21/17,2 KX21,CH395
  • Model Year: 2003,2011,2015,2021
Re: 2.0 Cable Control Conversion Kit Installation Video
« Reply #4 on: January 17, 2022, 08:30:18 AM »
Thank you, George. I appreciate the feedback. I always do my best to make my best, better.  \./8
Tom

  >:D    

_________________________

www.PainlessClutch.com

Offline Hillbilly

  • Mokai Maniac Member
  • ******
  • Posts: 1090
  • Cool Points: 58
  • Engine: Subaru
  • Model Year: many
Re: 2.0 Cable Control Conversion Kit Installation Video
« Reply #5 on: January 17, 2022, 11:38:21 AM »
You can see that here.  What size circuit breaker are you using?

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 7235
  • Cool Points: 75
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21/17,2 KX21,CH395
  • Model Year: 2003,2011,2015,2021
Re: 2.0 Cable Control Conversion Kit Installation Video
« Reply #6 on: January 17, 2022, 02:12:35 PM »
Thanks. I use a 5 amp breaker and it's just for the ACC plug. The engine has a 5 amp fuse (from the factory) for the charging system also, so there is that protection too.
Tom

  >:D    

_________________________

www.PainlessClutch.com

Offline Hillbilly

  • Mokai Maniac Member
  • ******
  • Posts: 1090
  • Cool Points: 58
  • Engine: Subaru
  • Model Year: many
Re: 2.0 Cable Control Conversion Kit Installation Video
« Reply #7 on: January 17, 2022, 03:36:34 PM »
Thanks, Tom.  I'm thinking about the harness for my new old boat which will probably have Tillotson power and wondering about protecting individual circuits or one 15amp breaker for the whole system.  Would appreciate any and all advice.

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 7235
  • Cool Points: 75
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21/17,2 KX21,CH395
  • Model Year: 2003,2011,2015,2021
Re: 2.0 Cable Control Conversion Kit Installation Video
« Reply #8 on: January 17, 2022, 04:55:59 PM »
I would do one 5 amp for the whole thing.
Tom

  >:D    

_________________________

www.PainlessClutch.com