Author Topic: Aluminum Steering Nozzle ES-kape V1 & 2.0  (Read 198 times)

0 Members and 1 Guest are viewing this topic.

Online Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 6514
  • Age: 46
  • Location: Georgia
  • Cool Points: 73
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: 1 EX21/17 / 2 KX21
  • Model Year: 2003 / 2011 / 2015
Aluminum Steering Nozzle ES-kape V1 & 2.0
« on: February 02, 2021, 11:08:06 AM »
Have been making these for a couple years now but wanted to start a thread here about them since I recently made more.

https://www.painlesstom.com/PumpNozzle.html

Tom

  >:D    

_________________________

www.PainlessClutch.com

Online CC-CODER

  • Mokai Maniac Member
  • ******
  • Posts: 1232
  • Age: 56
  • Location: OHIO
  • Cool Points: 61
  • Engine: EX21 w/17 Head - ES
  • Model Year: 2010 (2)
Re: Aluminum Steering Nozzle ES-kape V1 & 2.0
« Reply #1 on: February 02, 2021, 06:12:26 PM »
I don't know why but this type of stuff if interesting, maybe reminds me of making molds in 8th grade shop class.
How long does it take to cool between pours?
🤦🏼‍♂️ Chuck 🤷🏻‍♂️

Online Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 6514
  • Age: 46
  • Location: Georgia
  • Cool Points: 73
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: 1 EX21/17 / 2 KX21
  • Model Year: 2003 / 2011 / 2015
Re: Aluminum Steering Nozzle ES-kape V1 & 2.0
« Reply #2 on: February 02, 2021, 06:23:00 PM »
It always feels like a science experiment, probably why I enjoy it so much. Once I do the pour I give it a minute (the time it takes to put the crucible back in the foundry and add more ingots) before moving the mold out of the pour box and setting up the next one. Takes about 10-15 minutes to have the next batch melted and ready to pour.
Tom

  >:D    

_________________________

www.PainlessClutch.com