$txt['youtube'] = 'YouTube'; $txt['youtube_invalid'] = '#Invalid YouTube Link#'; Hull Bearing - Grease fitting

Author Topic: Hull Bearing - Grease fitting  (Read 13764 times)

0 Members and 1 Guest are viewing this topic.

Offline Hillbilly

  • Mokai Maniac Member
  • ******
  • Posts: 798
  • Location: Greensburg, Pa
  • Cool Points: 35
  • Engine: Subaru
  • Model Year: many
Re: Hull Bearing - Grease fitting
« Reply #15 on: October 27, 2013, 03:54:05 PM »
Those shafts look familiar to me, Tom.   You did a great job with the shafts and the greasers are a real labor saver.

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 5848
  • Age: 45
  • Location: Georgia
  • Cool Points: 59
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21 w/17 head - ES
  • Model Year: 2003 / 2011 / 2015
Re: Hull Bearing - Grease fitting
« Reply #16 on: October 28, 2013, 09:55:44 PM »
Thanks, George. Glad to hear I'm succeeding in reaching my goal of making the Mokai more fun and less work.  :)
Tom

  >:D    

_________________________

www.PainlessClutch.com

Offline bravodelta

  • Mokai Hero Member
  • ****
  • Posts: 393
  • Age: 63
  • Location: Columbia, Pennsylvania
  • Cool Points: 6
  • Engine: EX21
  • Model Year: 2012
Re: Hull Bearing - Grease fitting
« Reply #17 on: November 01, 2013, 12:35:38 AM »
This is a total convenience accessory. Ordered one. Easy access to grease the bearing..... Going to love this!!!!!!!!

Bob
Bravodelta

Offline bravodelta

  • Mokai Hero Member
  • ****
  • Posts: 393
  • Age: 63
  • Location: Columbia, Pennsylvania
  • Cool Points: 6
  • Engine: EX21
  • Model Year: 2012
Re: Hull Bearing - Grease fitting
« Reply #18 on: December 30, 2013, 05:23:10 PM »
This is a total convenience accessory. Ordered one. Easy access to grease the bearing..... Going to love this!!!!!!!!

Bob

Finally got off my duff and installed the Painless Hull Bearing Unit. Had it for 3 or 4 months.... Oh lazy me....LOL Enclosed are some photos to help anyone out. Any questions just ask.... Easy install....

1.   Photo 1 shows the engine and pump removed.
2.   Photo 2 shows the Hull Bearing Unit and instruction pamphlet.
3.   Photo 3 shows Original Hull Bearing Unit removed.
4.   Photo 4 shows Original Hull Bearing and Painless Hull Bearing Units side by side. Note that the rear clamp was removed from the Original Hull Bearing Unit and used for the rear clamp on the Painless Hull Bearing Unit.
5.   Photo 5 shows drill bit used for hose fitting.
6.   Photo 6 shows Grease Fitting tightened to Mokai.
7.   Photo 7 shows Painless Hull Bearing Unit in place and rear clamp tightened.
8.   Photo 8 shows the completed job.
« Last Edit: December 30, 2013, 05:29:07 PM by bravodelta »
Bravodelta

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 5848
  • Age: 45
  • Location: Georgia
  • Cool Points: 59
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21 w/17 head - ES
  • Model Year: 2003 / 2011 / 2015
Re: Hull Bearing - Grease fitting
« Reply #19 on: December 30, 2013, 10:04:59 PM »
Install looks great, Bob. Thanks for sharing.
Tom

  >:D    

_________________________

www.PainlessClutch.com

Offline Hersh

  • Full Member
  • ***
  • Posts: 131
  • Location: West Branch, Iowa
  • Cool Points: 8
  • Engine: Subaru
  • Model Year: 2011
Re: Hull Bearing - Grease fitting
« Reply #20 on: December 30, 2013, 11:01:12 PM »
Bob, great job on the pictures. Been wanting to add these to my boats but was unsure about the install.  By your photos it looks like it is doable even for me.  What grease/gun are you going to use?

Thanks,

Hersh

Offline bravodelta

  • Mokai Hero Member
  • ****
  • Posts: 393
  • Age: 63
  • Location: Columbia, Pennsylvania
  • Cool Points: 6
  • Engine: EX21
  • Model Year: 2012
Re: Hull Bearing - Grease fitting
« Reply #21 on: January 01, 2014, 12:30:15 AM »
Bob, great job on the pictures. Been wanting to add these to my boats but was unsure about the install.  By your photos it looks like it is doable even for me.  What grease/gun are you going to use?

Thanks,

Hersh

Welcome Hersh.... It's an easy install...... Do it!!!
Bob
Bravodelta

Offline Hillbilly

  • Mokai Maniac Member
  • ******
  • Posts: 798
  • Location: Greensburg, Pa
  • Cool Points: 35
  • Engine: Subaru
  • Model Year: many
Re: Hull Bearing - Grease fitting
« Reply #22 on: January 01, 2014, 10:09:05 AM »
And makes it So-o easy to grease.  No more motor removal.  Nice pictures, Bob.

Offline bravodelta

  • Mokai Hero Member
  • ****
  • Posts: 393
  • Age: 63
  • Location: Columbia, Pennsylvania
  • Cool Points: 6
  • Engine: EX21
  • Model Year: 2012
Re: Hull Bearing - Grease fitting
« Reply #23 on: January 01, 2014, 11:20:28 AM »
And makes it So-o easy to grease.  No more motor removal.  Nice pictures, Bob.
Welcome Hillbilly......... Here on this forum we try to make things easier for everyone... As understandable as possible. Pictures help a great deal. The more pictures the better. Every detail shown and explained. Makes life easier. I do this to help out Tom also with his products. Happy New Year Brother!!!

Bob
Bravodelta

Offline bravodelta

  • Mokai Hero Member
  • ****
  • Posts: 393
  • Age: 63
  • Location: Columbia, Pennsylvania
  • Cool Points: 6
  • Engine: EX21
  • Model Year: 2012
Re: Hull Bearing - Grease fitting
« Reply #24 on: January 10, 2014, 12:50:33 AM »
Bob, great job on the pictures. Been wanting to add these to my boats but was unsure about the install.  By your photos it looks like it is doable even for me.  What grease/gun are you going to use?

Thanks,

Hersh

Hello Hersh. Here's the grease gun I use. The tube is in the gun and the tub of grease is for the axle for my boat trailer.
Bravodelta

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 5848
  • Age: 45
  • Location: Georgia
  • Cool Points: 59
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21 w/17 head - ES
  • Model Year: 2003 / 2011 / 2015
Re: Hull Bearing - Grease fitting
« Reply #25 on: January 10, 2014, 01:18:27 AM »
Good grease, will work great for that. I've been known to use it myself.  \./8
Tom

  >:D    

_________________________

www.PainlessClutch.com

Offline Hersh

  • Full Member
  • ***
  • Posts: 131
  • Location: West Branch, Iowa
  • Cool Points: 8
  • Engine: Subaru
  • Model Year: 2011
Re: Hull Bearing - Grease fitting
« Reply #26 on: January 10, 2014, 08:39:27 AM »
 Thanks Bob.

 Hersh

Offline techj527

  • Jr. Member
  • **
  • Posts: 48
  • Age: 42
  • Location: Alaska
  • Cool Points: 2
Re: Hull Bearing - Grease fitting
« Reply #27 on: January 12, 2014, 10:59:50 AM »
I use lucas red and tacky in all my R/C Scale trucks and rock crawlers. It seems to be the best for the reduction gears and the ring and pinion gears. It stays on the gears rather than slinging off and building up on the transmission and differential housings. Ive found a huge difference in wear ( or lack of) on both straight cut and helical cut gears. However nothing will replace proper alignment and shimming.

Offline bravodelta

  • Mokai Hero Member
  • ****
  • Posts: 393
  • Age: 63
  • Location: Columbia, Pennsylvania
  • Cool Points: 6
  • Engine: EX21
  • Model Year: 2012
Re: Hull Bearing - Grease fitting
« Reply #28 on: January 15, 2014, 04:18:04 PM »
Bob, great job on the pictures. Been wanting to add these to my boats but was unsure about the install.  By your photos it looks like it is doable even for me.  What grease/gun are you going to use?

Thanks,

Hersh

Hello Hersh. Here's the grease gun I use. The tube is in the gun and the tub of grease is for the axle for my boat trailer.

I use what Tom has recommended.
Bravodelta