$txt['youtube'] = 'YouTube'; $txt['youtube_invalid'] = '#Invalid YouTube Link#'; Breather Idea

Author Topic: Breather Idea  (Read 1645 times)

0 Members and 1 Guest are viewing this topic.

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 5910
  • Age: 45
  • Location: Georgia
  • Cool Points: 59
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21 w/17 head - ES
  • Model Year: 2003 / 2011 / 2015
Breather Idea
« on: May 13, 2012, 01:09:43 PM »
I made this breather from a metal fuel filter to keep oil blow by controllable, factory motors with a breather box is able to control the oily mist that is pumped out that hose but when there is no breather box to tie into, you just have a mess to clean up after each run... Or you hooked it to your carb intake and have oil mist going into your motor instead. Either way you end up with less oil in your motor after each run.

This filter installed above the breather outlet of the motor will prevent oil from being spewed everywhere and keep things nice and neat. Mount one wherever you like but make sure it's upright and above the motor so gravity can do it's job of keeping the oil IN the motor!