$txt['youtube'] = 'YouTube'; $txt['youtube_invalid'] = '#Invalid YouTube Link#'; Pump Rebuild Design - Grease Lube w/ Grease Fitting

Author Topic: Pump Rebuild Design - Grease Lube w/ Grease Fitting  (Read 3537 times)

0 Members and 1 Guest are viewing this topic.

Offline Larry

  • Mokai Hero Member
  • ****
  • Posts: 302
  • Location: Maryland
  • Cool Points: 24
  • Engine: Honda GC190
  • Model Year: 2007/2007
Re: Pump Rebuild Design - Grease Lube w/ Grease Fitting
« Reply #15 on: June 23, 2018, 02:07:09 PM »
Tom ...You mentioned 10 pumps per gas fill up. Crazy question would that be the same for a mini grease gun ?

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 5805
  • Age: 45
  • Location: Georgia
  • Cool Points: 59
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21 w/17 head - ES
  • Model Year: 2003 / 2011 / 2015
Re: Pump Rebuild Design - Grease Lube w/ Grease Fitting
« Reply #16 on: June 23, 2018, 02:29:59 PM »
That's a good question, Larry. I've never used a mini grease gun so I don't know what the volume of each pump is compared to the standard size. Do 20 and see what happens.  >:D
Tom

  >:D    

_________________________

www.PainlessClutch.com

Offline CC-Coder

  • Mokai Maniac Member
  • ******
  • Posts: 830
  • Age: 55
  • Location: UH - OH
  • Cool Points: 47
  • Engine: EX21 w/17 Head - ES
  • Model Year: 2010 (2)
Re: Pump Rebuild Design - Grease Lube w/ Grease Fitting
« Reply #17 on: June 23, 2018, 02:45:40 PM »
I usually pump until I see grease. On average about ten for the pump an usually less for hull fitting.
🤦🏼‍♂️ Chuck 🤷🏻‍♂️

Offline Painlesstom

  • Painless Tom
  • Administrator
  • Mokai Maniac Member
  • *******
  • Posts: 5805
  • Age: 45
  • Location: Georgia
  • Cool Points: 59
  • Making Your Mokai... A Better Mokai!
    • Painless Products
  • Engine: EX21 w/17 head - ES
  • Model Year: 2003 / 2011 / 2015
Re: Pump Rebuild Design - Grease Lube w/ Grease Fitting
« Reply #18 on: June 23, 2018, 03:47:48 PM »
Pumping until you see grease is way too much. One reason I'm back to oil, putting grease in the river can't be a good thing. Pump until you can hear it, as soon as you hear crackling sounds of the grease escaping the front seal it's full.
Tom

  >:D    

_________________________

www.PainlessClutch.com